Weinmann MEDUCORE Standard2 - Analyzing Sessions

WM 68401 04/2021
MEDUCORE Standard
2
EN 205
6 Operation
1. Select the Print session report menu item.
The device prints the session report with all the details specified
in the operator menu (abstract example shown here):
When doing so, please note:
• The device only prints a resuscitation report in the session
report if a shock was delivered or a resuscitation mode
(AED mode or manual mode) was activated for > 2 minutes
in the selected session.
• In the resuscitation report, the first two events from the
events list are recorded and counted (see “13.12.2 Possible
values”, page 344).
2. To cancel printing of the session report: Select the Cancel
printing menu item.
Result A session report has been printed.
6.17 Analyzing sessions
6.17.1 Selecting a session in the session archive
Requirement • The device is switched on (see “6.1 Switching on the device”,
page 118).
• A patient group is selected (see “6.4 Selecting patient group”,
page 120).
•A mode is set.
• At least one session has been carried out with the device.
• The user menu is activated (see “10.1 Navigating the user
menu”, page 252).