298 EN MEDUCORE Standard
2
WM 68401 04/2021
12 Configuration by the operator
12.4 Registering the device with
WEINMANN Connect
Requirement A default network has been configured (see “12.3 Configuring
default network”, page 292).
1. Apply to WEINMANN Emergency Customer Service for a user
account for WEINMANN Connect by telephone or by e-mail.
2. Log in to WEINMANN Connect at www.weinmann-
connect.com using the user account data (in accordance with
the WEINMANN Connect user manual).
3. Add a new device to WEINMANN Connect in accordance with
the WEINMANN Connect user manual.
When doing so, please note: A WEINMANN Connect
registration code is generated for the device.
4. Activate the operator menu (see “13.1 Activating the operator
menu”, page 307).
5. Select Communication settings | Register device with
WEINMANN Connect.
6. Enter the WEINMANN Connect registration code.
The device is registered with WEINMANN Connect.
To Next Page
Loading...
