WM 68401 04/2021
MEDUCORE Standard
2
EN 297
12 Configuration by the operator
2. Make the settings for the network.
3. Select the Add network menu item.
4. Confirm with the OK function button.
The network is added as an available network.
Result A network has been manually configured for the device.
12.3.4 Specifying a network as the default network
Requirement • The WiFi interface of the device has been activated (see
“12.3.1 Activating the WiFi interface”, page 293).
• Several networks have been configured.
1. Select the Edit network menu item.
All configured networks are displayed.
2. Select a network as the default network to be configured.
3. Select the OK function button.
4. Select the Set network as default menu item.
The desired network is specified as the default network.
5. Restart device.
Result The selected network has been specified as the default network.
To Next Page
Loading...
Need help?
General
