Weinmann MEDUCORE Standard2 - Disassembling Defibrillation Electrodes;Paddles and Master Cable

WM 68401 04/2021
MEDUCORE Standard
2
EN 221
7 Disassembling
7.2 Disassembling defibrillation
electrodes/paddles and master cable
Requirement • The device is switched off (see “6.2 Switching the device off”,
page 119).
• The device is disconnected from the patient.
1. When used in a protective transport bag: Open the viewing
window and side compartments of the protective transport
bag.
2. Unlatch the master cable and disconnect it from the Pad
connection.
3. Disconnect the Pad connector of the defibrillation electrodes
from the master cable.
Alternatively:
Disconnect the Pad connector of the paddles from the master
cable.