Weinmann MEDUCORE Standard2 - Settings

250 EN MEDUCORE Standard
2
WM 68401 04/2021
9 Application menu
9.3 Settings
Parameter
Possible
values
Description Factory setting
Metronome (only
in manual and AED
modes)
Off
15:2 (only in
manual and
AED modes,
child)
30:2 (only in
manual and
AED modes,
adult)
Here you can set the metronome rhythm.
• AED mode adult:
30:2
• AED mode child:
15:2
• Manual mode:
off
SYNC (only with
Cardioversion
option, only in
manual mode)
Activated
Deactivated
Here you can set whether shocks are to be
delivered synchronized. Once a shock has
been delivered, then depending on the
settings in the operator menu (Operator
menu | Manual mode settings |
Defibrillation after cardioversion)
another cardioversion or defibrillation can be
carried out.
Deactivated
12-lead ECG (only
with 12-lead ECG
option)
-
Here you activate the 12-lead ECG function
mode. If you start 12-lead ECG function
mode from AED or manual mode, the device
automatically switches to monitor mode in
the background.
-
Print (only with
Printing option)
-
Here you can print the following printouts:
• Live printout
• 12-lead ECG printout
• Replay printout
The Printing menu item is grayed out if the
printer is not connected. When the printer is
printing, the menu item is called Stop print
xx s. A printing process can be finished
prematurely by pressing this menu item.
A counter indicates the time remaining until
the end of printing.
-