372 EN MEDUCORE Standard
2
WM 68401 04/2021
18 Technical data
18.7 Charging station
18.8 Printer and printer paper
Specification Charging station
Dimensions (W x H x D) 175 mm x 46 mm x 135 mm
Supply voltage 12 V to 15.1 V direct voltage
Weight 380 g (tare weight)
Operation:
• Temperature range
• Humidity
0 °C to +45 °C
5 % rh to 95 % rh, no condensation
Storage:
• Temperature range
• Humidity
-30 °C to +70 °C
5 % rh to 95 % rh, no condensation
Short circuit resistance Yes
Connection to power supply network
• WEINMANN Emergency-specific plug
connection
• Hard-wired power connection on the rear of the
charging station for on-board power supply
Electromagnetic compatibility (EMC) acc. to
EN 60601-1-2:
Radio interference suppression
Radio interference immunity
RTCA DO 160 F
EN 55011
EN 61000-4 (Parts 2 and 3)
EN 1789
Degree of protection against ingress of drips IPX1
Power consumption Maximum 30 W, on standby maximum 0.4 W
Specification Printer and printer paper
Printer
Manufacturer Woosim Systems Inc.
Type WSP-i350
Size 120 mm x 130.5 mm x 58.4 mm
Weight 424 g
Print method Direct thermal printing
Resolution 203 dpi: 8 dots/mm
Bluetooth
®
interface
• Bluetooth
®
interface: Version 3.0
• Class: 2
• Frequency band: 2402 MHz to 2480 MHz
Range 1 m
To Next Page
Loading...
Need help?
General
