WM 68401 04/2021
MEDUCORE Standard
2
EN 117
5 Function check
5.6 Carrying out a function check on the
printer (only with Printing option)
At the end of the device function check you can print out a
function check report. By assessing this report, you can check that
the printer is working properly. This printer function check is not
part of the device function check.
Requirement • A printer has been connected to the device (see “6.16.1
Connecting the printer to the device”, page 196).
• The printer is switched on.
1. Carry out a function check of the device (see “5.2 Carrying out
a function check”, page 104).
2. When the status report appears: Print the function check report
using the Print function button (see “6.16.5 Printing a
function check report”, page 201).
3. Assess whether the printer is working properly:
• The function check report has been printed.
• The function check report is legible in its entirety and not
interrupted.
• No other printer defect is apparent.
Result The printer function check has been completed.
To Next Page
Loading...
