72 EN MEDUCORE Standard
2
WM 68401 04/2021
3 Description
3.10 Options
You can tailor the range of functions on the device to your needs
using the options. You can enable these options using a device-
specific enable code (see “12.1 Enabling options”, page 290). The
following options are available:
Option Description Parts required/conditions
Manual defibrillation This option enables manual mode. -
Cardioversion
This option allows cardioversion to
be carried out in manual mode.
Manual defibrillation option
enabled and activated
Printing
This option allows various reports
and printouts to be printed:
• Function check report
• Live printout
• Defibrillation report
• 12-lead ECG printout (only with
12-lead ECG option)
• Replay printout (only with
Replay view option)
• Session report
•Printer
• Printer paper
• Printer battery
• Charging station for printer
battery with power supply
unit and charger
•Printer case
12-lead ECG This option enables 12-lead ECG.
• ECG cable with connection
for 12-lead ECG extension
cable
• 12-lead ECG extension cable
E-mail delivery 12-lead ECG
This option allows you to deliver a
12-lead ECG to an e-mail address.
• 12-lead ECG option enabled
and activated
• Network connected to the
Internet
• Device registered with
WEINMANN Connect (see
“12.4 Registering the device
with WEINMANN Connect”,
page 298)
To Next Page