194 EN MEDUCORE Standard
2
WM 68401 04/2021
6 Operation
6.13.3 Canceling muting or pausing of audio alarm
output
Requirement An alarm is active and is muted or paused.
1. Briefly (< 2 s) press the alarm button .
Alternatively:
Switch mode.
Result Muting or pausing of audio alarm output is canceled.
6.14 Changing the volume of the device
Requirement • The device is switched on (see “6.1 Switching on the device”,
page 118).
• A patient group is selected (see “6.4 Selecting patient group”,
page 120).
1. Open the application menu using the navigation knob.
2. Select the Volume menu item.
3. Select volume and confirm with the navigation knob.
Result The volume of the device has been changed.
6.15 Saving event manually in the session
data set
Measured values and user actions carried out on the device are
saved in the internal memory and on the SD card.
With the event button , events which cannot be recorded by
the device automatically (e.g. intubation, administration of
medication, etc.) can be saved in the data set in order
retrospectively to assign them chronologically during evaluation.
To Next Page
Loading...
Need help?
General
