WM 68401 04/2021
MEDUCORE Standard
2
EN 195
6 Operation
Requirement • The device is switched on (see “6.1 Switching on the device”,
page 118).
• A patient group is selected (see “6.4 Selecting patient group”,
page 120).
1. Press the event button .
The events list opens.
2. Select and confirm an event from the events list using the
navigation knob.
Result The device saves the event selected in the events list in the session
data set.
If you are the operator of the device and have access to the
operator menu, you can adapt the events list to suit your
requirements:
Operator menu | System settings | Events list (see “13.12
System settings”, page 342)
To Next Page
Loading...
Need help?
General
