WM 68401 04/2021
MEDUCORE Standard
2
EN 137
6 Operation
After 30/15 metronome beats, there is a pause to allow for
ventilation:
2. Ventilate the patient twice.
The device outputs the message:
3. Repeat the CPR sequence.
4. If the patient is intubated:
• Open the application menu using the navigation knob.
• Select the symbol in the Metronome menu item.
5. If the patients shows vital signs (breathing, response): Take
basic patient care steps.
6. Before every cardiac rhythm analysis: Check that the
defibrillation electrodes are positioned correctly.
Result CPR has been carried out.
6.7 Manual defibrillation (only with
Manual defibrillation option)
6.7.1 Carrying out manual defibrillation using
defibrillation electrodes
This function is only available if manual mode has been enabled
and activated by the operator: Operator menu |
System settings | Enable options | Manual defibrillation (see
“13.12 System settings”, page 342).
If you are the operator of the device and have access to the
operator menu, you can disable manual mode: Operator menu |
System settings | Disable functions | Manual mode (see
“13.12 System settings”, page 342).
Voice prompt (optional) AED instruction
Ventilate twice Ventilate twice
Voice prompt (optional) AED instruction
Carry out cardiopulmonary
resuscitation
CPR
To Next Page
Loading...
Need help?
General
