204 EN MEDUCORE Standard
2
WM 68401 04/2021
6 Operation
2. Select the Print menu item.
The printer prints the replay view of the event on printer paper
(10 s from the time of the event, shown in abstract form here):
3. To stop printing manually: Select the Stop print xx s menu
item.
Result Replay view of an event (replay printout) has been printed.
6.16.7 Print a session report (only with Printing
option)
Requirement • A printer has been connected to the device (see “6.16.1
Connecting the printer to the device”, page 196).
• The Print option is enabled and activated (see “13.12 System
settings”, page 342).
• The details included in the session report have been specified
in the operator menu (see “13.9 Printer settings (only with
Printing option)”, page 332).
• A session has been selected in the session archive (see “6.17.1
Selecting a session in the session archive”, page 205).
If you are the operator of the device and have access to the
operator menu, you can adapt automatic stopping of printing to
suit your requirements:
Operator menu | Printer settings | Automatic stop print (see
“13.9 Printer settings (only with Printing option)”, page 332)
To Next Page
Loading...
Need help?
General
