Weinmann MEDUCORE Standard2 - Page 239

WM 68401 04/2021
MEDUCORE Standard
2
EN 239
8 Hygienic reprocessing
When the device has been disassembled from the portable
unit: Mount the device on the portable unit (see “4.1.2
Mounting the device on the portable unit”, page 76).
4. Stow components and accessories in the protective transport
bag (see “4.2.1 Stowing components and accessories in the
protective transport bag”, page 76).
Alternatively:
Stow components and accessories on the portable unit (see
“4.2.2 Stowing components and accessories on the portable
unit”, page 83).
5. Connect the power supply (see “4.3 Connecting a power
supply”, page 83).
6. Carry out a function check (see “5 Function check”, page 103).
7. If required: Store the device, components, and accessories in
accordance with the conditions for storage (see “15 Storage”,
page 354).
Result The parts are ready for use again.