Weinmann MEDUCORE Standard2 - Page 261

WM 68401 04/2021
MEDUCORE Standard
2
EN 261
10 User menu
10.3.4 SpO
2
settings
10-5 SpO
2
settings submenu
Parameter Possible values Description Factory setting
Feed rate
12.5 mm/s
25 mm/s
50 mm/s
Here you can set the feed rate of the
SpO
2
curve display and so change
the time resolution.
25 mm/s
Pulse tone priority
Activated
Deactivated
Here you can set whether pulse tone
is to take priority over heart rate
tone. The tone level of the pulse
tone is adapted to measured oxygen
saturation.
Activated