286 EN MEDUCORE Standard
2
WM 68401 04/2021
11 Alarms and faults
11.3.7 Printing
Fault Cause Remedy
Printer not connecting to the
device
E-mail delivery 12-lead ECG or
network data transmission
occurring in parallel
Wait until e-mail delivery 12-lead
ECG or network data transmission
is finished. If necessary: Switch the
printer on again.
Poor reception quality
Put printer within range of the
device.
Feed button (FEED) pressed for
longer than 10 s
Do not press feed button (FEED)
for longer than 10 s.
Connection between device and
printer fails
Poor reception quality
Put printer within range of the
device.
Connection between printer and
device is extremely slow
Special characters in printout or
printer fails in airplane mode
Electromagnetic radiation in
airplane mode
Do not use the printer in airplane
mode.
Printer is at the limit of device
range
Reduce the distance between
device and printer.
To Next Page
Loading...
Need help?
General
