Weinmann MEDUCORE Standard2 - Page 305

WM 68401 04/2021
MEDUCORE Standard
2
EN 305
12 Configuration by the operator
9. Activate the operator menu (see “13.1 Activating the operator
menu”, page 307).
10. Select Device information | Device.
The device displays the installed software version.
11. Press and hold the On/Off button for at least 2 s to switch
off the device and save the settings.
12. Carry out a function check (see “5.2 Carrying out a function
check”, page 104).
13. If necessary: Set the date and time (see “10.3.7 System
settings”, page 264).
Result A software update has been carried out.