308 EN MEDUCORE Standard
2
WM 68401 04/2021
13 Operator menu
3. If the start menu disappears before the menu button is pressed
and the device switches to normal mode: Restart device.
4. Select the access code for the operator menu using the
navigation knob.
The operator menu appears:
The operator menu is protected by an access code. When the
device is supplied, this code is 000000. WEINMANN Emergency
urgently recommends changing this access code when the device
is put into operation. As long as the access code has not been
changed, the Update operator menu access code alarm is
outputted for 10 seconds.
To Next Page
Loading...
Need help?
General
