Weinmann MEDUCORE Standard2 - Page 326

326 EN MEDUCORE Standard
2
WM 68401 04/2021
13 Operator menu
13.6.2 Possible values
Parameter
Possible
values
Description Factory setting
Amplitude scaling
Autom.
2 mm/mV
5 mm/mV
10 mm/mV
20 mm/mV
Here you can set the amplification of the
ECG signal and thus the height of the
ECG curve.
Autom.
Feed rate
12.5 mm/s
25 mm/s
50 mm/s
Here you can set the feed rate of the ECG
curve display and so change the time
resolution.
25 mm/s
Line filter
Activated
Deactivated
By activating the line filter, you can
reduce ECG interference caused by the
power supply network.
Activated