Yamaha XVS650 - Crankshaft Installation

Plane bearing installer/remover:
YM-28898, 90890-04074
Middle driven shaft bearing driver:
YM-04058,90890-04058
NOTE: _
Align the projection ® on the bearing with
the slit (6) on the crankcase.
2.lnstall:
• Main
journal bearings CD
NOTE: _
• Attach the main journal bearing to the
plane bearing installer/remover ® middle
driven shaft bearing driver @.
• Align the projection ® on the bearing
with the projection (6) and stat © on the
special tools.
3
CRANKSHAFT AND CONNECTING RODS ENG ti).
CRANKSHAFT INSTALLATION
1.Attach:
• Main
journal bearings CD
I
~:
3.lnstall:
• Connecting rod bearings
CD
NOTE: _
• Align the projection ® of the bearings
with the notches (6) in the connecting rod
cap.
• Install each bearing in its
original place.
309..()()6
4.lnstall:
• Connecting rods
CD
NOTE: _
• The stamped "y" mark ® on the connect-
ing rods should face outward
of the crank~
case.
• Install each connecting rod
in its original
place.
4 - 62