ENGINE
OIL
LEVEL
INSPECTION
I
~gS
14fl1
ENGINE
OIL
LEVEL INSPECTION
1.Stand the motorcycle on a level surface.
NOTE: _
• Make sure the motorcycle is
upright
when
inspecting the oil level.
•
Place
the motorcycle on a suitable stand.
2.1nspect:
.Oillevel
Oil level should be between the
maximum
® and
minimum
(6)
marks.
Oil level is
below the
minimum
mark
~
Add oil up
to
the proper level.
to--._--+---+__
[K]
30
o
40
5
50
10
Recommended oil:
At
5°C
(40°F)
or
higher
~:
Yamalube 4 (20W40)
or
SAE
20W40
type
SE
motor
oil
At
15°C
(SOOF)
or
lower
(ID:
Yamalube 4 (10W30)
or
SAE
10W30
type
SE
motor
oil
• Do
not
add any chemical additives.
Engine
oil
also lubricates
the
clutch and
additives could cause clutch slippage.
• Do
not
allow
foreign material
to
enter
the
crankcase.
NOTE: _
Recommended engine oil classification;
API
Service liSE", IISF" type
or
equivalent (e.g.
"SF-SE", IISF-SE-CC", "SF-SE-SD" etc.).
3.Start the engine and let
it
warm
up
for
several minutes.
4.Turn
off
the engine and inspect the oil
level again.
NOTE: _
Before inspecting the oil level,
wait
a
few
minutes until the oil has settled.
3 -
17