REAR WHEEL
AND
REAR BRAKE
ICHASI~I
REAR WHEEL REMOVAL
1.Stand the motorcycle on a level surface.
A
WARNING
Securely support
the
motorcycle
so
there
is
no danger
of
it
falling over.
2.Remove:
• Bolts (final gear case)
3.Loosen:
• Rear axle
nut
CD
4.Remove:
• Rear wheel assembly
NOTE: _
Remove the rear wheel assembly, rear
wheel axle and drive shaft by pulling back
on the rear wheel assembly.
REAR WHEEL DISASSEMBLY
1.Remove:
• Bearings
G)
Remove the bearings using a standard
bearing puller
(V.
REAR WHEEL INSPECTION
1.1nspect:
• Rear wheel axle
Refer
to
ilFRONT WHEEL".
• Rear tire
Refer
to
"TIRE INSPECTION" in
CHAPTER
3.
•
Rear
wheel
Refer
to
"WHEEL INSPECTION" in
CHAP-
TER
3.
To Next Page
Loading...
