Yamaha XVS650 - CRANKSHAFT AND CONNECTING RODS

CRANKSHAFT AND CONNECTING RODS ENG
2.1nstall:
• Right crankcase
(onto the reft crankcase)
NOTE: _
Turn the shift cam to the position shown in
the figure so that it does not contact the
crankcase when installing the crankcase.
3.Tighten:
• Crankcase bolts
(follow the proper tightening sequence)
NOTE: _
The numbers embossed on the crankcase
indicate the crankcase tightening sequence.
@ (J) (M8) ~4 Nm (2.4 m· kg, 17.4ft ·Ib) I
G) ®, ® ... @ (M6)
~,....~ O-N-m-(1-.0-m-. -kg-,-7-.2-ft-.-lb-)-1
NOTE: _
• Lubricate the bolt threads with engine oil.
• Tighten the bolts in increasing numerical
order.
M6x45mm
CD,@,®"'@
M6x55mm
®
M6x95mm
®
M8x60mm
@),®
M8x80mm
(J)
M8x 100mm
®
4 - 64