6-3
WARNING
D Turn ON the power supply only after closing the upper and lower covers. Do not open the covers
while current is flowing.
Failure to observe this warning can result in an electric shock.
D The Digital Operator stop button can be disabled by a function setting; you must install a sepa-
rate emergency stop switch.
Failure to observe this warning can result in personal injury.
CAUTION
D Never touch the heatsink because the temperature is very high.
Failure to observe this caution can result in harmful burns to the body.
D Verify the safe working range of the Motor and machine before operation.
Failure to observe this caution can result in personal injury.
D Do not check signals during operation.
The machine or the Unit may be damaged.
D Do not change the settings of the inverter unnecessarily. All the constants of the Inverter have
been preset at the factory.
The machine or the Unit may be damaged.
6
To Next Page
Loading...
