ii
Notes for Safe Operation
Read this instruction manual thoroughly before installation, operation, maintenance or inspection of the
VS-626M5. In this manual, Notes for Safe Operation are classified as “WARNING” or “CAUTION.”
WARNING
Indicatesapotentiallyhazardoussituationwhich, if not avoided, could result in death or serious injury topersonnel.
CAUTION
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury to person-
nel and damage to equipment.
It may also be used to alert against unsafe practices.
Even items described in
CAUTION
may result in a vital accident in some situations. In either case, follow
these important notes.
The warning symbols for ISO and JIS standards are different, as shown below.
ISO JIS
The ISO symbol is used in this manual.
Both of these symbols appear on warning labels on Yaskawaproducts. Please abide by these warning labels regard-
less of which symbol is used.
The following shows the symbols of prohibition and mandatory action.
PROHIBITED
Specifies prohibited handling.
MANDATORY
Specifies actions that must be taken.
To Next Page
Loading...
Need help?
General