Notes for Inverter and Converter
iii
Notes for Inverter and Converter
J Confirmation upon Delivery
CAUTION
Page
D Do not install any Inverter or Converter that is damaged or has missing parts.
Failure to observe this caution may result in personal injury or equipment damage.
2-2
J Installation
CAUTION
Page
D Always hold the case when carrying the Inverter.
If the Inverter is held by the front cover,the main body of the Inverter may fall, possibly result-
ing in injury.
2-5
D Mount the Inverter and the Converter on nonflammable material (i.e. metal).
Failure to observe this caution may result in a fire.
2-5
D Install a fan or other cooling device to keep the ambient temperature of Inverter and
Converter below 55_C (131_F) and the intake air temperature to heatsink below
45_C(113_F).
Overheating may cause a fire or damage to the unit.
2-5
J Disconnecting the Digital Operator
WARNING
Page
D Disconnect all power before removing Digital Operator (JVOP-132). Then wait for the
time described on warning labels after the main circuit power supply and control pow-
er supply are disconnected and all indicators on the Inverter and the Converter have
gone out.
Failure to observe this warning may result in an electric shock.
2-9
CAUTION
Page
D Use only the screws provided with the cable bracket when installing the cable.
Improper installation may result.
2-9
To Next Page
Loading...
Need help?
General