Appendix
15 -30
15.8 VS-626M5 Specifications Entry Tables
Enter the specifications according to the configuration in use. Uncompleted items will be taken to be Yaskawa
standard settings, as indicated by numbers in dotted-line boxes.
Customer Name Model Device Name
Application
Machining center, lathe ( ) Main axis drive/Other ( )
J
Machine Specifications
Power Required
Short-time rating kW ( min., %ED) Continuous rating kW
Power Transmis-
1. Gear
--- High speed (H) Medium speed (M) Low speed (L)
sion Method
2. Belt
3. Direct connec-
Speed control
range (min
−1
)
tion
4. Built-in motor
Gear ratio
Load axis/Motor
axis
Motor axis con-
version inertial
moment
(kg
S
m
2
:GD
2
/4)
Acceleration/de-
celeration Fre-
quency
times/min. Acceleration/de-
celeration time
(0 ↔ Top) (s)
Speedometer
1. Not used
2. Used: Speedometer full scale ( ) min
−1
Load Meter
1. Not used
2. Used: Load meter full scale ( )% (Over continuous rating)
Orientation Con-
trol Method
1. Not used (No Orientation Card)
2. Motor encoder (No Orientation Card)
3. Load axis encoder (with ETC62613X)
4. Magnetic sensor (with ETC62614X)
5. NC orientation (No Orientation Card)
Solid Tap
1. Not used --- Speed (H) Speed (L) Tap size
2. Used
Max. speed
(min
−1
)
φ to φ
Acceleration/de-
celeration time (s)
Speed Refer-
1. Analog
ence
2. Digital 2-1 Binary
2-2 2-digit BCD
2-3 3-digit BCD
2-4 Internal speed settings
3. Serial commu-
nications
3-1 YENET1200
Input Common
Method (M5A
Type Only)
1. Sequence input signals 1-1 0 V common
1-2 +24 V common
1-3 External common
2. 12-bit digital input signals 2-1 0 V common
2-2 +24 V common
2-3 External common
Remarks
15
To Next Page
Loading...
Need help?
General