YASKAWA VS-656MR5

3-1
3
Wiring
This chapter provides typical connection examples of the Inverter and Con-
verter to peripheral units, main circuit wiring specifications, and control cir-
cuit wiring.
3.1 Connection with Peripheral Units 3 -2........
3.2 Connection Diagram 3 -5...................
3.3 Wiring Main Circuit Terminals 3 -7...........
3.3.1 Wires and Suitable Crimp Connectors 3 -7..........
3.3.2 Functions of Main Circuit Terminals 3 -13............
3.3.3 Main Circuit Configuration 3 -15....................
3.3.4 Main Circuit Connection Diagrams 3 -19.............
3.3.5 Wiring the Main Circuit 3 -21.......................
3.4 Wiring Control Circuit Signals 3 -24...........
3.4.1 Control Signal Connectors and Wires 3 -24...........
3.4.2 Terminal Arrangement of Control Signal
Connector 3 -26................................
3.4.3 Control Signal Functions 3 -28......................
3.4.4 Sequence Input Signal Circuit
(for Stand-alone Drive) 3 -32.....................
3.4.5 Sequence Output Signal Circuit
(for Stand-alone Drive) 3 -33.....................
3.4.6 Precautions for Control Signal Wiring 3 -33...........
3.5 Wiring Inspection 3 -35......................
3