YASKAWA VS-656MR5

xix
6.3 Converter and Inverter LED Displays 6 -7...........................
6.3.1 Display Details Tables 6 -7.................................................
6.3.2 Display when the Converter Control Power Supply Is Turned ON 6 -7...........
6.3.3 Display when an Error Occurs 6 -8..........................................
6.4 Constant Settings 6 -9...........................................
6.4.1 User Constant Functions Table 6 -9.........................................
6.4.2 Soft Start Time Setting (TSFS: C1-10) 6 -10...................................
6.4.3 Load Factor Meter Full Scale (LMFS: C1-18) 6 -10.............................
6.4.4 Zero Speed Detection Level (ZSLVL: C1-19) 6 -10.............................
6.4.5 Speed Agree Width (AGRBD: C1-20) 6 -10...................................
6.4.6 Speed Detection Level and Detection Width (SDLVL: C1-21, SDHYS: C1-22) 6 -11
6.4.7 Torque Detection Signal Operation Level (TDLVL: C1-23) 6 -11..................
6.4.8 External Control Torque Limit Level (TLEXT: C1-24) 6 -11.......................
6.4.9 Motor Code Selection (MTR: C1-25) 6 -11....................................
6.4.10 Rated Speed (S100: C1-26) 6 -13..........................................
6.4.11 Gear Ratios (RHGR: C1-27, RMGR: C1-28, RLGR: C1-29) 6 -13...............
6.4.12 Servo Mode Flux and Base Speed Ratio
(ΦSVH: C1-31, RBSH: C1-32, ΦSVL: C1-33, RSBL: C1-34) 6 -13..............
6.4.13 Positioning Completion Detection Width (ZFIN: C2-09 and C3-09) and
Positioning Completion Cancel Width (ZCAN: C2-10 and C3-10) 6 -13..........
6.4.14 Orientation Speed (SORT : C2-11 and C3-11) 6 -14...........................
6.4.15 BCD Stop Position Reference Resolution (PBCD: C2-12 and C3-12) 6 -15.......
6.5 Speed Control Mode Adjustment Procedure 6 -16.....................
7 Wide Constant Power Control Using Winding Selection 7 -1
7.1 Features of the Winding Selection Wide Constant Power Drive 7 -2....
7.2 Winding Selection Motor Standard Connections 7 -3.................
7.3 Motor Characteristics 7 -4........................................
7.4 Winding Selection Operation 7 -5..................................
7.5 Winding Selection Methods 7 -6...................................
7.5.1 M Code Winding Selection Method 7 -6......................................
7.5.2 Automatic Winding Selection methods 7 -8...................................
7.6 Winding Selection Control Precautions 7 -11.........................
8 Orientation Control Using an Encoder 8 -1................
8.1 Device Configuration 8 -2.........................................
8.2 Standard Connection Diagram 8 -3................................
8.3 Orientation Specifications 8 -5.....................................
8.3.1 Standard Specifications 8 -5...............................................
8.3.2 Load Shaft Encoder Specifications 8 -5......................................
8.4 Dimensions 8 -6.................................................
8.4.1 Encoder Orientation Card (ETC62613X) 8 -6.................................
8.4.2 Load Shaft Mounted Encoder (NE-1024-2MDF-068) 8 -6......................
8.5 Load Shaft Encoder Connector Terminal Arrangement 8 -7............
8.6 Important Points for Encoder Mounting and Wiring 8 -8...............