Chapter 3 PERFORMING MEASUREMENTS
3-4
When Using AC Power
•If you are going to use AC power to operate the instrument, the battery pack must
be removed from the instrument.
•Using AC adapter is only indoors (0 to 40 °C). Don’t use outdoors.
For the method of removing the battery pack, refer to page 1-19.
1. Read the “Safety Precautions” given at the beginning of this manual thoroughly
to ensure safety.
2. Connect the AC adapter to the instrument.
3. Insert the AC adapter’s power plug into an AC power outlet.
4. Press the power switch located on the top of the instrument to turn ON the
power.
The POWER LED will be lit while the power to the instrument is ON.
AC adapter
Caution
Refer
TIP
To Next Page
Loading...
Need help?
General
