Chapter 3 PERFORMING MEASUREMENTS
3-8
Connecting the Optical Fiber
This section explains how to connect an optical fiber by taking an example of connecting a
FC connector.
1. Open the optical connector cover on the top of the instrument.
2. Fit the tab of the optical connector into the slot on the optical adapter, and
insert the connector into the adapter.
3. Turn the plug housing clockwise to secure the connector.
FC connector
CAUTION
When connecting the optical connector, gently insert it perpendicularly into the optical
adapter. Shaking it sideways or inserting it by force may not only damage the optical
adapter, but also damage the ferrule on the optical connector.
To Next Page
Loading...
Need help?
General
