Chapter 7 USING USEFUL FUNCTIONS
7-7
7.3 Using the Cursor Link Function
The cursor link function keeps a certain distance among markers (
1
to
3
, Y1 to Y3). For
instance, when the cursor is moved 1km, all the markers will be moved 1km in the same
direction as the cursor.
The method of changing the cursor link setting is given below.
♦ Example: “OFF” → “ON”
•The cursor link function must be used when you want to change marker positions
without changing the distances among the markers.
•The cursor link setting will be retained in the internal memory even if the
instrument is turned OFF. So, when the instrument is turned ON, the cursor link
setting in effect just before the instrument was turned OFF last time will be
restored.
I wonder if the markers could be
moved at once.
TIP
To Next Page
Loading...
