Chapter 1 BEFORE USING THE INSTRUMENT
1-17
Attaching a New Optical Adapter
Refer to the Cautions given on page 1-18.
1. Make sure that the power to the instrument is turned OFF.
WARNING
Do not replace the optical adapter while the power to the instrument is ON.
Should the laser emit and enter the eyes, they may be seriously damaged or loss of
eyesight may result.
For the method of turning OFF the power, refer to page 3-107.
2. Slide the optical connector cover on the top of the instrument to open it.
3. Insert the new optical adapter straight into the rear shell.
4. Push the optical adapter’s lock lever outward to lock the adapter.
Refer
Refer
To Next Page
Loading...
Need help?
General
