Chapter 3 PERFORMING MEASUREMENTS
3-2
3.1 Flow of Measurement Steps
This section explains the flow of optical fiber measurement.
WARNING
Use of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous radiation exposure.
Step 1: Turning ON the Power
Step 2: Warming Up the Instrument
Step 4: Setting the Measurement Conditions/Auto
Search Conditions
Step 3: Connecting an Optical Fiber to the Instrument
Step 6: Measuring an Optical Fiber
Step 8: Recording the Measured Data
Step 9: Turning OFF the Power
Step 7: Checking the Measured Data
Step 5: Setting the File Name / Select drive and folder to Store
the File
To Next Page
Loading...
