Chapter 7 USING USEFUL FUNCTIONS
7-16
7.6 Entering Various Information for the Measured
Trace
In addition to a label, this instrument allows you to enter various pieces of information
regarding the measured trace.
The items that can be entered are shown below.
• Company name
• Name
• Cable ID
• Fiber ID
• Fiber type
• Cable code
• Originating location
• Terminating location
• Current data flag
The section explains how to enter these items.
•Once information is entered, it will be retained until new information is entered.
•The entered information will be saved together with the measured data (in SOR
and TRD format).
For the method of entering a label, refer to Chapter 4 and page 7-11.
I wonder if I could enter various
pieces of information.
TIP
Refer
To Next Page
Loading...
