Chapter 6 FILE OPERATION
6-6
Selecting the File to be Recalled
8. Locate the cursor to the file to be recalled by turning the rotary knob.
9. Press [F2] (FILE SELECT) to select the file.
The color of the selected file name will change. “*” also appears in front of the file
name.
Up to four files (traces) can be selected.
•If a file(s) that you do not want to recall is selected by mistake, repeat steps 8 and
9. This will cancel selection of that file(s).
•By pressing [SCALE], the file list display format can be changed. However, if “FILE
NAME + LABEL” is selected, it will take some time before the file list is displayed.
FILE NAME + LABEL
Recalling the Selected File(s)
10. Press [F4] (EXECUTE) to recall the selected file(s).
TIP
To Next Page
Loading...
Need help?
General
