Chapter 6 FILE OPERATION
6-13
3. Locate the cursor to “PRINT” by using the rotary knob or [S] / [T].
4. Press [ENTER] to change file operation.
The following window will appear.
Selecting a Drive
If no drives are installed on the instrument or if they are installed but not connected,
it is not possible to select them. In this case, only files that are stored in the internal
memory can be printed. In the case of the floppy disk drive, this function is not
possible unless a floppy disk is inserted into the floppy disk drive.
5. Select the drive.
For the method of changing the drive, refer to page 3-91.
Caution
Refer
To Next Page
Loading...
Need help?
General
