YOKOGAWA AQ7260 OTDR User Manual

Chapter 6 FILE OPERATION
6-24
3. Select the drive to be initialized.
For the method of selecting a drive, refer to page 3-91.
4. Press [F4] (DRIVE INITIALIZE).
The following window will appear.
5. Press [F5] (YES) to start initialization.
All the folders and files in the drive will be deleted.
The drive will not be initialized if [F1] (NO) is pressed.
Caution
TIP
Refer

YOKOGAWA AQ7260 OTDR Specifications

General

Brand	YOKOGAWA
Model	AQ7260 OTDR
Category	Measuring Instruments
Language	English