Chapter 7 USING USEFUL FUNCTIONS
7-46
2. Press [F5] (2WAY TRACE).
The following window will appear.
•The merged trace of the two traces will not be displayed. But all of event maker
displayed on the original direction trace.
•The merged event list can be saved.
•The merged event list can be printed.
•A comment can be added to the merged event list.
•For the method of saving the event list, refer to page 3-88.
•For the method of printing the event list, refer to page 3-104.
•For the method of adding a comment to the event list, refer to page 5-23.
A list of merged events will be shown.
TIP
Refer
To Next Page
Loading...
