Chapter 7 USING USEFUL FUNCTIONS
7-50
Changing the Modulation Frequency
The modulation frequency can be changed as explained below.
♦ Example: “CW” → “1kHz”
1. Locate the cursor to “MODULATION” by using the rotary knob or [S] / [T].
2. Press [ENTER].
A selection window will appear.
*: Indicates the default setting.
3. Locate the cursor to “1kHz” by using the rotary knob or [S] / [T].
4. Press [ENTER] to register the change made to the modulation frequency
setting.
TIP
*CW
270Hz
1kHz
Selectable
modulation
frequencies
2kHz
To Next Page
Loading...
Need help?
General
