Chapter 8 USING OPTIONS AND EXTERNAL DEVICES
8-57
Device Message
No. Function
Header
Numeric
Part
Description
16-3 Modulated frequency
of light source
ILMR
Requires modulated frequency of light source
0 : CW
1 : 270Hz
2 : 1kHz
3 : 2kHz
This command is valid at light source mode.
16-4
Light source
wavelength
LSWLR
Requires wavelength of light source.
m= 0 : The first wavelength of the first
1 : The second wavelength of the unit
2 : The third wavelength of the unit
3 : The fourth wavelength of the unit
Number of wavelength depends on the unit.
This command is valid at light source mode.