10.2 Setting the USB Interface Mode
Procedure
1.
Press UTILITY to display the following menu.
2.
Press the Remot I/F soft key to display the following menu.
Setting the USB Interface Mode
3.
Press the USB soft key to display the following menu.
4.
Press the soft key that corresponds to the USB interface mode that you want to
use.
Explanation
Setting the USB Interface Mode
Storag (Storage)
Select Storag to use the USB storage feature (see section 4.4, “USB Storage Feature”).
TMC (USB-TMC)
Select TMC to perform command control from a VISA library.
To Next Page
Loading...
Need help?
General
