11-3
IM GS210-01EN
Ethernet Interface (Option)
11.3 Configuring Network Settings (TCP/IP)
Procedure
1.
Press UTILITY to display the following menu.
2.
Press the Remot I/F soft key to display the following menu.
3.
Press the LAN soft key to display the following menu.
Turning DHCP On and Off
4.
Press the DHCP soft key to select On or Off.
Setting the IP Address
You can only set the IP address when DHCP is off.
5.
Press the IP Adrs soft key to display the IP address setup screen.
The NUM LOCK key illuminates, and the GS200 changes to keypad mode.
6.
Press the and keys that correspond to numbers 0 to 9 and the period to set
the IP address.
7.
Press the Enter soft key to confirm the setting.
Setting the Subnet Mask
You can only set the subnet mask when DHCP is off.
5.
Press the
Subnet Mask soft key to display the subnet mask setup screen.
The NUM LOCK key illuminates, and the GS200 changes to keypad mode.
6.
Press the and keys that correspond to numbers 0 to 9 and the period to set
the subnet mask.
3
2
1
4
5
6
7
8
9
10
11
12
13
14
15
App
Index