6.6 Saving and Loading Programs
Procedure
1.
Press PROGRAM to display the following menu.
2.
Press the List Files soft key to display the currently saved files and the following
menu.
Saving Programs
3.
Press the Save File soft key to display the following menu.
Using a Soft Key to Directly Specify the Program from Pgrm01 to Pgrm04
4.
Press a soft key from Pgrm01 to Pgrm04 to save the corresponding program.
While the program is being saved, the soft key that you pressed is highlighted.
When the file save operation completes, an asterisk is displayed to the left of the name of
the file that was saved. Return to the menu that was shown in step 2.
Using the File List to Specify the File to Overwrite
4.
Press the soft key to move the cursor (underline) up and down and select the
file that you want to overwrite.
5.
Press the Over Write soft key. When a file is being saved, “Over Write” is
highlighted.
When the file save operation completes, an asterisk is displayed to the left of the name of
the file that was saved. Return to the menu that was shown in step 2.
To Next Page
Loading...
Need help?
General
