14.3 Self-Test
Procedure
Displaying the Self-Test Menu
1.
Press UTILITY to display the following menu.
2.
Press the Sys Config soft key to display the following menu.
3.
Press the Test soft key.
Executing the Display Test
4.
Press the Display Test soft key. The entire display and the SAMPLE ERROR
indicator illuminate.
5.
Press RANGE to turn off the entire display. Press RANGE to illuminate the
entire display.
6.
When you press one of the keys that are below the display, the indicators at
the top of the front panel illuminate in the following order. The indicators illuminate
in the reverse order each time that you press one of the
keys.
SAMPLE ERROR
REPEAT
STORE
REMOTE
ERROR
The OUTPUT key
The NUM LOCK key
7.
Press ESC to end the test.
Executing the Key Test
4.
Press the Key Test soft key.
To Next Page
Loading...
Need help?
General
