7.9 Performing Statistical Computations on
Measured Values (Recall)
Procedure
1.
Press MEASURE to display the following menu.
2.
Press the Store Config soft key to display the following menu.
3.
Press the Recall soft key to display statistical computations of the measured
values that were most recently stored.
Explanation
For details on the statistical computation feature, see section 2.5.
Statistical Computations
The following statistical computations are displayed. If no measured results have been
stored, each computation displays “-----------.”
Maximum – minimum
Mean value
Standard deviation
Minimum value
Maximum value
Storage count
<<Corresponding Command Mnemonic>>
:TRACe:DATA:STATistics?
Using Communications to Load Stored Results
You can use the communication feature to read the storage result directly.
<<Corresponding Command Mnemonic>>
:TRACe:ACTual?
:TRACe:DATA:FORMat ASCii|BINary
:TRACe:DATA:ENDian BIG|LITTle
:TRACe:DATA:READ? [TM|SF|SL|MF|ML]
7-10
IM GS210-01EN
To Next Page
Loading...
Need help?
General
