Need help?Do you have a question about the YOKOGAWA GS200 and is the answer not in the manual?
General| Category | Power Supply |
|---|---|
| Output Channels | 1 |
| Voltage Resolution | 1 mV |
| Current Resolution | 0.1 mA |
| Current Accuracy | 0.05 % |
| Ripple and Noise (Voltage) | 1 mVrms |
| Ripple and Noise (Current) | 3 mArms |
| Load Regulation (Voltage) | 0.01% + 2 mV |
| Load Regulation (Current) | 0.01 % |
| Line Regulation (Voltage) | 0.01% + 2 mV |
| Line Regulation (Current) | 0.01 % |
| Interface | USB |
Describes the front panel layout and controls of the GS200 instrument.
Details the connectors and ports located on the rear panel of the GS200.
Identifies and describes the purpose of various keys on the GS200 front panel.
Details the GS200's voltage and current source capabilities and measurement features.
Explains source range, function, action, output control, limiters, and wiring systems.
Covers program feature, interval time, slope time, repetition, triggers, and files.
Outlines essential safety precautions for handling the GS200 instrument.
Provides guidelines for instrument installation, orientation, and location.
Details the procedure and warnings for connecting the power cord and supply.
Explains how to turn the instrument on and off and checks for normal operation.
Covers fundamental key operations and methods for entering values on the GS200.
Explains how to select between 2W (local) and 4W (remote) sense wiring systems.
Describes how to connect and use the GS200's USB storage feature for data transfer.
Explains how to set the source function to voltage or current.
Details how to select the appropriate voltage or current source range.
Describes how to set the desired voltage or current source level.
Explains how to set voltage and current limiters for device protection.
Covers the procedure for turning the instrument's output on and off.
To Next Page
