YOKOGAWA GS200 User Manual

13.2 Commands
13-20
IM GS210-01EN
13.2.8 External I/O Commands (ROUTe group)
:ROUTe:BNCO/?
Function Sets or queries the output BNC signal.
Syntax
:ROUTe:BNCO TRIGger|OUTPut|READy
TRIGger Sets the output BNC signal
to the program trigger
signal.
OUTPut Sets the output BNC signal
to the output state signal.
READy Sets the output BNC signal
to the READY signal.
:ROUTe:BNCO?
→ TRIG The output BNC signal is
the program trigger signal.
→ OUTP The output BNC signal is
the output state signal.
→ READ The output BNC signal is
the READY signal.
Example
:ROUT:BNCO READ
:ROUT:BNCO?
:ROUTe:BNCI/?
Function Sets or queries the input BNC signal.
Syntax
:ROUTe:BNCI TRIGger|OUTPut
TRIGger Sets the input BNC signal
to the program trigger
signal.
OUTPut Sets the input BNC signal
to the output state signal.
:ROUTe:BNCI?
→ TRIG The input BNC signal is the
program trigger signal.
→ OUTP The input BNC signal is the
output state signal.
Example
:ROUT:BNCI OUTP
:ROUT:BNCI?

YOKOGAWA GS200 Specifications

General

Brand	YOKOGAWA
Model	GS200
Category	Power Supply
Language	English