YOKOGAWA GS200 - Output Commands (Output Group)

13.2 Commands
13-10
IM GS210-01EN
:OUTPut[:STATe]/?
Function Sets or queries the output state (on/off).
Syntax
:OUTPut[:STATe] 1|0|ON|OFF
1 or ON Turns the output on.
0 or OFF Turns the output off.
:OUTPut[:STATe]?
→ 1 The output is on.
→ 0 The output is off.
Example
:OUTP ON
:OUTP:STAT 0
:OUTP?
13.2.2 Output Commands (OUTPut group)