YOKOGAWA GS200 - Setting the Program Interval Time

6.2 Setting the Program Interval Time
Procedure
1.
Press PROGRAM to display the following menu.
2.
Press the Intvl soft key to display the program interval time setup screen.
3.
In up/down key mode, press the and keys to set the program interval time.
In keypad mode, press NUM LOCK +
or to set the program interval time.
Explanation
Program Interval Time
The program interval time specifies the execution interval for each step in the program.
For details on the program interval time, see section 2.4.
Range
0.1 s to 3600.0 s
<<Corresponding Command Mnemonic>>
:PROGram:INTerval
<time>
|MINimum|MAXimum
6-2
IM GS210-01EN