Loading Files That Were Created on a PC onto the GS200
1.
Follow the procedures listed in section 4.4, “Setting the USB Storage Feature”
and “How to Connect the USB Cable” to connect the GS200 and a PC using a
USB cable.
2.
Copy the program that you created on the PC to the PROGRAM folder on the
GS200’s GS200ROM disk.
Loading Programs
1.
Press PROGRAM to display the following menu.
2.
Press the List Files soft key to display the currently saved files and the following
menu.
3.
Press the soft key to move the cursor (underline) up and down and select the
file that you want to load.
4.
Press the Load File soft key.
The program file is loaded. An asterisk is displayed to the left of the file that was loaded.
Deleting Programs
3.
Press the soft key to move the cursor (underline) up and down and select the
file that you want to delete.
4.
Press the Delete File soft key to display the following menu.
6.6 Saving and Loading Programs
6-9
IM GS210-01EN
Programs
3
2
1
4
5
6
7
8
9
10
11
12
13
14
15
App
Index
To Next Page
Loading...
Need help?
General
